Digital Valve Controller Emerson Fisher FIELDVUE DVC6200 HC AC AD PD SIS Valve Positioner for Pneumatic Control Valves

The Fisher DVC6200 is a digital valve controller that mounts directly on pneumatic actuators. It uses a 4-20 mA input with HART communication to give precise valve positioning, diagnostics, and control. Many plants install it on control valves because it replaces older pneumatic positioners, provides real-time valve performance data, and keeps running reliably for years.

• Non-contact, linkage-less travel feedback using Hall effect sensor
• Local interface with LCD display and pushbuttons
• Quick auto-calibration and setup
• Advanced valve diagnostics through ValveLink software
• Low steady-state air consumption
• Integral mounting to Fisher and other actuators
• Hazardous area approvals (explosion-proof, intrinsically safe)
• HART 7 protocol support

• Input Signal: 4-20 mA DC
• Communication Protocol: HART
• Supply Pressure: 20 to 100 psig (1.4 to 6.9 bar)
• Air Consumption: <0.38 scfm (10.8 l/min) steady state
• Maximum Output Capacity: 10.0 scfm (283 l/min) at 20 psig
• Operating Temperature: –40 to 85 °C (–40 to 185 °F)
• Enclosure Rating: IP66 / NEMA 4X
• Housing Material: Aluminum or stainless steel
• Stroke/Travel: Linear up to 606 mm (24 inches), rotary up to 90°
• Accuracy: Typically ±0.5% of span

• Pneumatic control valves in process industries
• Refineries and chemical plants
• Power plants (steam and feedwater valves)
• Oil and gas production facilities

A: Yes – mounts on both linear and rotary actuators.

A: Less than 0.38 scfm steady state.

Email:edwardzhao@gbsxj.com

Phone/WeChat/WhatsApp:+8615000725058

• DVC6200 SIS – safety instrumented system version
• DVC6200f – FOUNDATION Fieldbus version
• DVC6200p – PROFIBUS PA version
• ValveLink software for diagnostics